Monday, December 9, 2013

Klik Dispenser Blog

Just an FYI, that I've created another blog here, which is devoted to Klik candy dispensers.  I know there are quite a few PEZ collectors that also collect Kliks, so please have a look if you like.  As I come across new Klik dispenser variations and photos I add them.  The blog now includes 141 Klik dispenser variations.


Saturday, December 7, 2013

Christmas PEZ Piano

Each December I like to move my Christmas PEZ to a more prominent spot in the house, which is the top of our piano.  I really enjoy adding new dispensers to the Christmas collection.  My wife and daughter enjoy this tradition too.  This year I added the Penguin, 2013 Snowman, Red-face Snowman, Black-face Santa, and Tex-Mex Santa.  I still don't have the vintage Santas (full-body Santa, Santa A, and Santa B) and other older Christmas dispensers, but one of these days I hope to include them in the festivities!





Tuesday, November 5, 2013

PEZcific Feb 20-22, 2014: Mark Your Calendar

Mark your calendar for the 13th Annual PEZcific Coast Convention in Southern California.  It's set to take place Feb. 20-22 (Thu-Sat), 2014 at its usual spot, the Manhattan Beach Marriott hotel.  Maheba Mehri is once again the PEZcific Hostess.  She does a great job with the convention each year and I'm sure 2014 will be fantastic.

As you can see from the logo below, the 2014 theme is Mardi Gras.  A quote at the PEZcific website reads "Laissez les bons temps rouler" which is a Cajun French phrase that translates to "Let the good times roll".

I'm already looking forward to going.  This will make my 6th PEZcific convention.  In years past, I've only attended the PEZ showroom open to the public on Saturday.  However, this time I'm thinking about registering and also taking part in Friday's activities: room hopping to visit dealers, seminars, contests, and bingo.  Sounds fun.  What do you think?  Do you PEZheads recommend registering and enjoying the full PEZ convention experience?  Post a comment a let me know your thoughts.

Thursday, October 31, 2013

Bullseye the Target Dog PEZ Now Available In-Store at Target

Bullseye the Target Dog PEZ is now available in-store at Target.  I found mine today here in California.  As you can see in the photos below, the PEZ comes with a Target gift card (in the shape of a bone, nice touch).  It cost only $5 and that includes a $5 gift card, so it's like getting a free PEZ if you shop regularly at Target!  You can pay for different amounts on the gift card, but $5 is the lowest amount you can put on it.  This PEZ dispenser has been anticipated for awhile now, so it's nice to see its release.  Funny that the blister card has has a Christmas theme and today is only Halloween, but that's become the new normal in America.









Saturday, October 26, 2013

Free Your Inner Robot: Rocket Pen to Robot PEZ

Over the years I've seen robot PEZ dispensers for sale and always thought they were very cool.  I knew they were made from PEZ Rocket Pens released in 2000 as you could see the same heads being used.  What I didn't realize until recently was the stem for the robot PEZ came from inside the Rocket Pen.  I discovered this from watching PEZhead Eric Thorell's YouTube video and from reading Pastor PEZ's blog post.  After this realization I had to get busy and create some robot PEZ of my own!

In this post I want to show you photos of the method I used to free the robot PEZ and a little decorative twist for the stem.  The tools I used for this DIY PEZ project were a Dremel rotary tool with cutting wheel (my favorite attachment!), standard screwdriver, and needle nose pliers.

Step 1: With your fingernail, carefully peel off the oval PEZ sticker on the front of the rocket pen and keep it aside for later.

Step 2: Break off the little clip on the back of the rocket pen to expose the full seam on the back.  You can see the rocket pen with clip broken off in the photo below with the Dremel.

Step 3: Turn on the Dremel to a low speed and gently start cutting along the seam on the back.  You just want to cut deep enough to make it through the outer housing.  Take extra care near the head because you don't want to cut it.

Step 4: Flip over the rocket pen and gently cut along the seam on the front.

Step 5: Once you have the front and back seams cut, insert your screwdriver in the slot and gently pry open the housing.  Do this in a few spots along the seam and soon you'll pop open the housing to reveal your robot!

Step 6: Gently wiggle the stem back and forth until you free it from the pen housing.  Sometimes the stem is wedged in there pretty well, so just be patient.  For a couple robots who didn't want to escape, I used a pair of needle nose pliers to break away some of the housing near the head, which seemed to help.

Step 7: Place the PEZ sticker on the stem.  The spot I liked best is in the middle of the PEZ logo on the non-patent side of the dispenser.  Another spot that might look nice is in the middle of the front spine.

I recently bought my set of four rocket pens from eBay for $15 shipped, which is a fair deal.  This deal is still available here in case you're thinking about freeing some robots of your own!

As you'll see in the photos, I sliced right through the lights, but I'm now thinking it would be cool to preserve them to attach to the stem somehow.  The lights in the rocket pen activate by shaking the pen, so you could shake your robot PEZ and it could light up!  Of course, you'd have to deal with concealing the circuit board, wires, and batteries to make it look good.  Details, details. :-)

One last note... the pink head robot is also available with a pink stem as you can see in the YouTube video and blog post I mention above.  I'd be interested to know if the black, blue, and yellow head robots are available in stem colors other than white?

Well, that's all for now.  I hope I've inspired you to tackle this or another PEZ project.  Until next time.



















Tuesday, October 22, 2013

(Part 2) 70's and 80's Ads from Politikin Zabavnik Magazine in former Yugoslavia

This is a follow-up to a post I uploaded a couple weeks ago.  Below are some more great PEZ advertisements from the 1970's and 1980's originally published in the Politikin Zabavnik magazine from the former Yugoslavia.  These are available to buy here on eBay from a seller in Serbia.  There are 49 ads for sale and each is only $3, which seems pretty reasonable to me.  The auctions end on Mon 10/28 at 11am PDT.  I was really hoping this seller would list more items and sure enough it happened!
















Friday, October 18, 2013

Fantasy Advertising Trucks

With all the recent advertising trucks released by PEZ lately, there are some industrious and creative folks taking advantage of this by making fantasy advertising trucks and selling them on eBay.  Below are some of my favorites.  I really enjoy those that have the sticker design color matched to the cab and trailer.  I also appreciate when an additional sticker is included on the back, which gives it that extra detail.

The first two groups of trucks below are my favorites. The soda trucks include Orange Crush, Coca Cola, Pepsi, 7-Up, and RC.  The candy bar trucks include Butterfinger, Reese's Peanut Butter Cups, Kit Kat, Baby Ruth, and Crunch.  I've seen some of these trucks sell for over $20 a piece, which is impressive and shows there is a market for them.

Purposely not included in the photos below, are some poor examples I've seen where the logo is stretched / distorted and the sticker is grainy due to bad printer resolution.  Come on people, take the extra time and make 'em nice. :-)

What are your thoughts on fantasy advertising trucks?  Let me know in the Comments section.